1、 In case of any abnormal condition or signal during operation, stop the machine immediately, cut off the power supply, check and eliminate the fault in time, and do not forcibly open the door to prevent accidents.
2、 During the loading and unloading process of the mechanical screen trash remover, the equipment shall be kept level, and the damage to the equipment caused by loading and unloading slings shall be noticed and protected.
3、 After hoisting in place, pay attention to adjusting the mutual position of the interface between the equipment and the foundation, the water channel and the anchor bolts at each place.
4、 Carefully do a good job in the lubrication of the grating machine and keep the transmission parts in good lubrication condition. Lubricating oil and grease shall be added and replaced for motors, reducers, bearings and other oiling parts as required. It should be noted that when the equipment is in operation, manual cleaning or lubrication is prohibited, and it is prohibited to stay near the protective cover of the drive chain.
5、 Regularly inspect the grating machine, such as the motor, reducer and other transport stations, and timely replace the worn parts. At the same time, determine the overhaul and medium maintenance cycle, and maintain on time. Frequently check whether the bracket components can be moved flexibly, timely remove the foreign matters in the clip, and check whether the screws of each component are loose. Share the environmental protection technology from the new green exhibition.
6、 If the reducer base is to be removed due to transportation needs, it should be restored first, pay attention to the transmission axis of the two sprockets, and install the inspection chain and chain guard.
